What is the Basic Tune Process?
These steps illustrate the general tuning and flash process. More detailed information for these steps can be found in the C3 Tuning and Data Center Help.
1Make a dyno run.
2Open and select the run in Data Center.
3Open a stock file (.stk) from your Power Vision in C3 Tuning.
4Load a saved or built-in correction formula.
6Save the modified tune to the Power Vision.
7Flash your vehicle using the Power Vision.
8Make a new dyno run.
9Close the previous run. Depending on your desired results, repeat from step 1 until your desired results are achieved.
Related Topics